Marijuana.com

Wicked

Well, I was stoned one night and had a genius idea.

I'm going to format this the way my mind was thinking at the time, so, don't mind how it's set up.

Pre-Design

- I had just smoked an 8th of Purple Haze out of my bong, I felt good.
- I emptied out a flat 3 liter of soda and stared at it.
- My hookah was broke, and I liked it.

You Will Need

(1) 3 liter soda bottle
(1) Extra soda cap
(1) Box cutter blade (to cut the soda bottle accurately)
(2-4) Hookah hoses (or lengths of oxygen hose, or garden hose if you got balls)
(1) Drill bit that matches the diameter of the stem you are going to use.
(1) Stem and bowl (preferably the cheap metal kind that have the rings to hold them.
(1) Roll electrical tape (plumbers tape helps as a base, too)
A sanitary sink or large enough container to hold enough water, and to fit a 3 liter soda bottle

Directions

1.) Make sure that the soda cap is screwed on tightly and drill the hole in the middle of the cap for the stem.

2.) Place the stem into the hole, and make a tight wrap of plumber's tape around the stem just to cover any flaws you may have made drilling the hole in the cap. It helps seal the stem a little better and saves you some hassle when removing it. Then loose wrap some electrical tape around the cap. Don't cover the entire cap, just enough to make a seal between the stem and the cap.

3.) With a drill (if you think you can do it without busting the plastic open on the bottle), drill two to four holes on the curved portion of the soda bottle. You'll have to visualize where you want them.

4.) If you have hookah hoses, put them in the hole so the washer is on the inside and it makes a good seal. If you can notice any flaws, just use electrical tape to make a seal.

If you're using oxygen hoses, you're really going to have to seal the shit out of it, since they're straight with no real way to attach them. I'd reccomend a single round of plumber's tape and super glue to harden it and bond the hoses in place. Don't use it until the fumes from the glue escape the bottle, though.

5.) With the box cutter, cut around the seam at the bottom of the soda bottle. You should see it right underneath of the label, usually. It's just seam left behind from molding the bottle.

You should have something that looks like a gravity bong at this point.

6.) Fill up the sink, or whatever you are using to hold water.

The concept is the same as a gravity bong, but there are a few difference.

**BE PREPARED TO BURN A LOT OF WEED, PRACTICE WITH SCHWAG FIRST**

- Instead of pulling the hitter out, unscrew the cap and replace it with the extra cap. It takes time, but, it's worth it.

- When hitting, you don't have to inhale. Just open your lungs up and let the gravity hookah do the work. You'll probably take too much the first few times, or you won't take enough. You gotta get a feel for how it works before you really appreciate it.

It's the perfect party item, it gets up to four people stoned very quickly, and people are usually fascinated with how it looks. It looks like shit, and looks like a science project but it is awesome.

 

timiscute

That sounds pretty rad. You gotta post pics.

~Tim

__________________

toked24/7

sounds cool but pics would help me see it better

Wicked

There lies the problem, I had made it back in September of last year. I recently moved out of my old house and into my new one so it got trashed. I'll be making a new one as soon as I can find a store here that carries three liter sodas.

If you're having a hard time visualizing it, just imagine a gravity bong made out of a soda bottle with hookah hoses connected to it, instead of just expelling the smoke from one hole. It's really not too far-fetched, if it was I wouldn't have been able to make it in the shape I was in. I just wanted to combine two things I love to use, bongs and hookahs and make people cry with the outcome.

A good hit off of it would make my eyes water up and I would cough uncontrollably, and I'd like to think I can handle some pretty big tokes.