Lord Vapor

I am getting ready to clean my vaporcannon for the first time and I have a few questions.

First I am going to use 91% iso alcohol b/c I want to retain as much resin as I can to smoke later. Does anyone have a good technique for doing this and evaporating the alcohol?

Also, can you soak the tubing and extract any resin from it? That seems like kind of a pain but I like to conserve as much as possible.

Any suggestions are welcome as I have never done this b4, I am going to run and buy some screens, replacing that looks like a pain in the ass!!

5drive

Do not apply any kind of solvent or cleaner to your tubing. It should take quite a while to accumulate a significant amount of residue in the tubing. When you reach that point the best idea I've seen is one that someone posted a while back. Get a screw with the appropriate size head and pull it through the tubing with some strong string. You'll scrape most of the residue off the inside wall of the tubing and pull it out.

tokinGLX

yikes mate, if youre looking to vape/smoke the stuff you are cleaning from the wand, why use any iso alcohol at all¿ find a paperclip or something similar, slightly bend the end of it and scrape scrapescrape. 5-10 minutes later and your wand will be nearly perfectly clean. then you can take your semi-gooey chunks of vape hash and consume it at will.

__________________
united we toke, divided we choke.

Lord Vapor

I have heard of people soaking their peice and then evaping the alcohol so only the resin remains. Maybe that is a bad idea, I am not sure now. I will probably just wait a few days now anyway b/c people are coming over to use it and i don't have time to clean it.

Buzzby

I fill up my whip with alcohol, cap both ends, and hang it over the showerhead overnight. Then I pour the alcohol through a coffee filter into a custard cup. I use alcohol-soaked pipe cleaners to get out any stubborn bits. I put the custard cup in a dark, cool room with a fan blowing the air around. The alcohol evaporates, leaving the inside of the custard cup coated in golden goo.

The tubing never really comes clean. Fortunately, you can buy enough of the same kind of tubing at Home Depot to make five replacements for around $5.50.

I've never heard of isopropyl alcohol having any kind of interaction with the tubing, but if you're worried about that, don't fill up the whole whip. Just remove the glass parts and soak them in alcohol.

__________________

Lord Vapor

I am going to try this, thank you very much for the answer. How long does the alcohol take to evap?? What do you do with the golden goo, smoke it? Thats what i would do!

Buzzby

It varies. It all depends on the temperature, the humidity, and how much surface area is exposed to air, how much air movement there is. A day. Maybe two.

If you have a hash oil pipe, that would be an efficient way of using it.

I used to drop it on weed in my vape, but that tended to gum things up. My most recent endeavor was to melt six ounces of Trader Joe's 72% cacao chocolate in the custard cup by putting it in a shallow pan of simmering water. Stir it around until the hash oil dissolves thoroughly into the chocolate's fat. Put a piece of aluminum foil on a cookie sheet and pour the chocolate out on it. When it solidifies, you have a very tasty and potent chocolate bar.

assclown04

Hi, I found this thread in search of cleaning my vaporwarez. I have a question for Buzzby - How do you cap the ends of the whip? I find it difficult to get a tight seal, and thus difficult to entirely fill my whip w/ the alcohol.